Lex-art

$device_id=$params['did'];
$destination_id=$params['dest'];
$packet_id=$params['pid'];
$command_id=$params['c'];
$data=$params['d'];

if ($device_id==0) {
 if ($command_id==10) {
  //temp
 setGlobal('ws.tempInside',round($data/100));
 } elseif ($command_id==12) {
  //motion
  callMethod('intSensor.statusChanged',array('status'=>1));
  clearTimeOut($id.'_move');
  setTimeOut($id.'_move',"callMethod('intSensor.statusChanged',array('status'=>0));",20);  
 }
}

$id=$params['rcswitch'];
if ($id=='12345') {
 //sensor 1
}

$ow_gorod=getGlobal("ow_city.name");
$Record = SQLSelectOne("SELECT * FROM `OPENWEATHER_CITY` WHERE `CITY_NAME`='".$ow_gorod."'");
   $ow_city_id = $Record['CITY_ID'];
   $ow_city_lat = $Record['CITY_LAT']; 
   $ow_city_lng = $Record['CITY_LNG']; 
setGlobal('ow_city.id',$ow_city_id);
setGlobal('myobject.coord1',$ow_city_lat);
setGlobal('myobject.coord2',$ow_city_lng);

//------ включение-выключение реле-----
//------ esp8266 WiFi IoT 
//getURL ("http://ip_adres/gpio&st=1&pin=13",0);
//getURL ("http://ip_adres/gpio&st=0&pin=13",0);
//------ esp8266 скетч http://кушеев.рф/archives/836
//getURL ("http://ip_adres/gpio13on",0);
//getURL ("http://ip_adres/gpio13off",0);
//------ iMatic http://кушеев.рф/archives/494
//exec ("python /var/www/templates_alt/imatic.py 13 1");
//exec ("python /var/www/templates_alt/imatic.py 13 0);
//------ Arduino uart скетч http://кушеев.рф/archives/650
//exec ("echo 1013 > /dev/ttyS3");
//exec ("echo 1113 > /dev/ttyS3");
//------ GPIO http://кушеев.рф/archives/817
// exec ("gpio -1 write 29 0")
// exec ("gpio -1 write 29 1")
//------ i2c http://кушеев.рф/archives/923
// exec ("/var/www/templates_alt/rele.sh 0x20 1 0");
// exec ("/var/www/templates_alt/rele.sh 0x20 1 1");
$n = $params['nameobj'];

if ($n == "Switch1") {
 if (getGlobal("Switch1.status")==1) {
        exec ("gpio -1 write 29 1");
    } else {
        exec ("gpio -1 write 29 0");
    }
}

if ($n == "Switch2") {
 if (getGlobal("Switch2.status")==1) {
        exec ("echo 1003 > /dev/ttyS3");
    } else {
        exec ("echo 1103 > /dev/ttyS3");
    }
}

if ($n == "Switch3") {
 if (getGlobal("Switch3.status")==1) {
        exec ("/var/www/templates_alt/rele.sh 0x20 1 0");
    } else {
        exec ("/var/www/templates_alt/rele.sh 0x20 1 1");
    }
}

if ($n == "Switch4") {
 if (getGlobal("Switch4.status")==1) {
        exec ("/var/www/templates_alt/rele.sh 0x20 4 0");
    } else {
        exec ("/var/www/templates_alt/rele.sh 0x20 4 1");
    }
}

if ($n == "Switch5") {
 if (getGlobal("Switch5.status")==1) {
        exec ("echo 1006 > /dev/ttyS3");
    } else {
        exec ("echo 1106 > /dev/ttyS3");
    }
}

if ($n == "Switch6") {
 if (getGlobal("Switch6.status")==1) {
        exec ("echo 1007 > /dev/ttyS3");
    } else {
        exec ("echo 1107 > /dev/ttyS3");
    }
}

if ($n == "Switch7") {
 if (getGlobal("Switch7.status")==1) {
        exec ("echo 1008 > /dev/ttyS3");
    } else {
        exec ("echo 1108 > /dev/ttyS3");
    }
}

if ($n == "Switch8") {
 if (getGlobal("Switch8.status")==1) {
        exec ("echo 1009 > /dev/ttyS3");
    } else {
        exec ("echo 1109 > /dev/ttyS3");
    }
}

$latitude=(double) getGlobal("myobject.coord1");
$longitude=(double) getGlobal("myobject.coord1");
$sun_info = date_sun_info(time(), $latitude, $longitude); //Ваши географические координаты.

foreach ($sun_info as $key => $val) {

if ($key == 'sunrise') {

$sunrise = $val;
//echo 'Восход: '.date("H:i:s", $sunrise).'<br>';
setGlobal('ThisComputer.SunRiseTime',date("H:i", $sunrise));
}

if ($key == 'sunset') {

$sunset = $val;
$day_length = $sunset - $sunrise;

//echo 'Заход: '.date("H:i", $sunset).'<br>';
//echo 'Долгота дня: '.gmdate("H:i", $day_length).'<br>';
setGlobal('ThisComputer.SunSetTime',date("H:i", $sunset));
setGlobal('ThisComputer.LongTagTime',gmdate("H:i", $day_length));
}

if ($key == 'transit') {
//echo 'В зените: '.date("H:i:s", $val).'<br>';
setGlobal('ThisComputer.TransitTime',date("H:i", $val));
}

if ($key == 'civil_twilight_begin') {
//echo 'Начало утренних сумерек: '.date("H:i", $val).'<br>';
setGlobal('ThisComputer.Chicivil_beginTime',date("H:i", $val));
}

if ($key == 'civil_twilight_end') {
//echo 'Конец вечерних сумерек: '.date("H:i:s", $val).'<br>';
setGlobal('ThisComputer.civil_endTime',date("H:i", $val));
}

} 

say(LANG_GENERAL_SETTING_UP_LIGHTS,2);
// to-do

setTimeOut('testTimer','say("Hello world!");',30);

say ("Приветствую тебя мой господин",2);

say(timeNow());